Palladium nanoparticles‐decorated triethanolammonium chloride ionic liquid‐modified TiO2 nanoparticles (TiO2/IL‐Pd): A highly active and recoverable catalyst for Suzuki–Miyaura cross‐coupling reaction in aqueous medium

In this work, an easily obtained procedure was successfully implemented to prepare novel palladium nanoparticles decorated on triethanolammonium chloride ionic liquid‐functionalized TiO₂ nanoparticles [TiO₂/IL‐Pd]. Different methods were carried out for characterizations of the synthesized nanocatalyst (HR‐TEM, XPS, XRD, FE‐SEM, EDX, FT‐IR and ICP). TiO₂/IL‐Pd indicated good catalytic activity for the Suzuki–Miyaura cross‐coupling reaction of arylboronic acid with different aryl halides in aqueous media at ambient temperature. The recycled catalyst was investigated with ICP to amount of Pd leaching after 6 times that had diminished slightly, Thus, was confirmed that the nanocatalyst has a good sustainability for C–C Suzuki–Miyaura coupling reaction. The catalyst can be conveniently separated by filtration of the reaction mixture and reused for 6 times without significant loss of its activity. It supplies an environmentally benign alternative path to the existing protocols for the Suzuki–Miyaura reaction.     

Network topology of deeply supercooled water

Empirical potential structure refinements have been made to recent high-energy x-ray diffraction data, providing molecular models of deeply supercooled water. The average O-O coordination number is found to drop from 5.13 at 293?K to 4.85 at 244?K, within 3.5?Å. Triplet O-O-O bond angle distributions reveal a broad peak centred at 96.4° at 293?K which shifts to 100.0° at 244?K, indicative of the local geometry becoming increasingly tetrahedral with decreasing temperature. However, although the number of non-bonded interstitial molecules between the first and second shells is depleted upon cooling, the number of interstitial molecules forming triplets that are embedded within the hydrogen bonded tetrahedral network at θ_OOO?=?53°, remains constant. This is consistent with previous observations of an invariant O-O coordination number with temperature (4.24 out to 3.3?Å) and corresponds to non-bonded molecules positioned at close to half the ideal tetrahedral angle. Both -O-O-O- and hydrogen-bonded -O-H-O- ring length distributions show increases in 6 and 7-membered rings upon supercooling. This is concomitant with a shift and increase in intensity of peaks at r₄ ～8.7?Å and r₅ ～10.8?Å in the oxygen-oxygen pair distribution function, which in the models correspond to correlations between adjacent and next-nearest-neighbour hydrogen-bonded rings.     

W-shaped mesogens and variations of their molecular structure

New bent-core liquid crystalline dimers with W-shaped molecular geometry have been prepared and studied. We have modified the dimer shape by variation of the connecting part between two bent-core units and changing the terminal chains (perfluoroalkyl, siloxanealkyl). Additionally, we have altered the inner bend angle value (120°, 60° and 148°) by utilization of different aromatic units. Mesomorphic properties of new dimers were established based on the texture observation in the polarizing microscope and DSC measurements. Moreover, x-ray structural analysis has been performed for selected dimers to confirm phase identification. For most of the studied dimers, nematic or columnar phases have been detected, for several compounds appearing in a nematic-columnar phase sequence on cooling from the isotropic phase. The studied dimers showed richer polymorphism than their monomeric counterparts.     

Study of degradation behavior of besifloxacin,characterization of its degradation products by LC–ESI–QTOF–MS and their in silico toxicity prediction

Knowledge and understanding of the stability profile of a drug is important as it affects its safety and efficacy. In the present work, besifloxacin, a new, fourth‐generation fluoroquinolone antibiotic, was subjected to different forced‐degradation conditions as per International Conference on Harmonization (ICH) guidelines such as hydrolysis (acid, base and neutral), oxidation, thermal and photolysis. The drug degraded under acidic, basic, oxidative and photolytic conditions while it was found to be stable under dry heat and neutral hydrolytic conditions. In total, five degradation products (DPs) were formed under different conditions—DP1 and DP2 (photolysis), DP3 (oxidation), DP4 (acidic), DP3 and DP5 (basic). The chromatographic separation of besifloxacin and its degradation products was achieved on a Sunfire C₁₈ (250 mm × 4.6 mm, 5 μm) column with 0.1% aqueous formic acid–acetonitrile as a mobile phase. The gradient RP‐HPLC method was developed and validated as per ICH guidelines. The degradation products were characterized with the help of LC–ESI–QTOF mass spectrometric studies and the most likely degradation pathway of the drug was proposed. In silico toxicity assessment of the drug and its degradation products was carried out, which indicated that DP3 and DP4 carry a mutagenicity alert.     

Mechanical deformations of a liquid crystal elastomer at director angles between 0° and 90°: Deducing an empirical model encompassing anisotropic nonlinearity

Despite the wealth of studies reporting mechanical properties of liquid crystal elastomers (LCEs), no theory can currently describe their complete mechanical anisotropy and nonlinearity. Here, we present the first comprehensive study of mechanical anisotropy in an all‐acrylate LCE via tensile tests that simultaneously track liquid crystal (LC) director rotation. We then use an empirical approach to gain a deeper insight into the LCE's mechanical responses at values of strain, up to 1.5, for initial director orientations between 0° and 90°. Using a method analogous to time–temperature superposition, we create master curves for the LCE's mechanical response and use these to deduce a model that accurately predicts the load curve of the LCE for stresses applied at angles between 15° and 70° relative to the initial LC director. This LCE has been shown to exhibit auxetic behavior for deformations perpendicular to the director. Interestingly, our empirical model predicts that the LCE will further demonstrate auxetic behavior when stressed at angles between 54° and 90° to the director. Our approach could be extended to any LCE; so it represents a significant step forward toward models that would aid the further development of LCE theory and the design and modeling of LCE‐based technologies. © 2019 The Authors. Journal of Polymer Science Part B: Polymer Physics published by Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019, 57, 1367–1377     

Photooptical Properties of Polymethacrylates Having Cyanoazobenzene‐Containing Side Groups with Lateral Methyl Substituents and Different Spacer Length

New photochromic polymethacrylates with different spacer length having azobenzene side groups and lateral methyl substituents were synthesized. The phase behavior of polymethacrylates and their photooptical properties were studied and compared with unsubstituted analogues. It is shown that an introduction of lateral methyl substituents results in almost complete suppression of liquid crystalline (LC) phase formation and strong decrease of photoinduced dichroism values. It is found that rates of the photoinduced E‐Z isomerization and back thermal Z‐E isomerization are almost independent on spacer lengths. Due to the presence of lateral substituents, the photoinduced azobenzene Z‐form shows remarkable long lifetime, and back thermal conversion at room temperature takes more than 10 days. Specific peculiarities of the photoorientation process in polymer films under the polarized UV and visible light action were studied and their mechanism is suggested. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1337–1342     

Zinc‐containing ionic liquid as a dual solvent‐catalyst in base‐free condensations under ultrasonic irradiation

In this study, natural‐based ionic liquid (IL) using caffeine (Caff), trietahnolamine (TEA) and ZnBr₂, [Caff‐TEA]⁺[ZnBr₃]^?, which features high catalytic activity and environmentally‐friendly nature was synthesized with melting point of 76 °C by a facile method. The synthesized [Caff‐TEA]⁺[ZnBr₃]^? has high catalytic activity as both of catalyst and solvent in condensation reactions for the synthesis of benzylidenes, bis‐hydroxyenones and xanthenes. Synthesized IL was characterized by proton nuclear magnetic resonance (¹HNMR), Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD) and Energy‐dispersive X‐ray spectroscopy (EDX) analysis. Also synthesized heterocycles were characterized by FT‐IR, proton nuclear magnetic resonance (¹HNMR) and carbon nuclear magnetic resonance (¹³CNMR).     

Densitometry and indirect normal‐phase HPTLC–ESI–MS for separation and quantitation of drugs and their glucuronide metabolites from plasma

The present work describes novel methods using densitometry and indirect or off‐line high performance thin‐layer chromatography–mass spectrometry (HPTLC–MS) for the simultaneous detection and quantification of asenapine, propranolol and telmisartan and their phase II glucuronide metabolites. After chromatographic separation of the drugs and their metabolites the analytes were scraped, extracted in methanol and concentrated prior to mass spectrometric analysis. Different combinations of toluene and methanol–ethanol–n‐butanol–iso‐propanol were tested for analyte separation and the best results were obtained using toluene–methanol–ammonia (6.9:3.0:0.1, v/v/v) as the elution solvent. All of the drug–metabolite pairs were separated with a homologous retardation factor difference of ≥22. The conventional densitometric approach was also studied and the method performances were compared. Both of the approaches were validated following the International Conference on Harmonization guidelines, and applied to spiked human plasma samples. The major advantage of the TLC–MS approach is that it can provide much lower limits of detection (1.98–5.83 pg/band) and limit of quantitation (5.97–17.63 pg/band) with good precision (?3.0% coefficient of variation) compared with TLC–densitometry. The proposed indirect HPTLC–MS method is simple yet effective and has tremendous potential in the separation and quantitation of drugs and their metabolites from biological samples, especially for clinical studies.     

Effect of quality control on the proliferation of the extract from Taraxacum mongolicum Hand.‐Mazz. in Lactobacillus plantarum

In recent years, the fingerprint of high‐performance liquid chromatography has been extensively applied in the identification and quality control of traditional Chinese medicine. It can be a potential protocol for assessing the authenticity, stability and consistency of traditional Chinese medicine and guaranteeing the expected biological activity. In this paper, a method using high‐performance liquid chromatography to identify and control the quality of the extract of Taraxacum mongolicum Hand.‐Mazz. (TME) was established. With this method, the correlation coefficients of the similarity of 10 batches were ≥0.994. The TME displayed a steady proliferative effect in Lactobacillus plantarum. In brief, this study successfully built a reliable, simple and efficient method to control and confirm the quality and the stability of biological activity of the TME.     

Intermediates of N-Heterocyclic Carbene (NHC) Dimerization Probed in the Gas Phase by Ion Mobility Mass Spectrometry: C−H⋅⋅⋅:C Hydrogen Bonding Versus Covalent Dimer Formation

N-Heterocyclic carbenes (NHCs, :C ) can interact with azolium salts ( C−H⁺ ) by either forming a hydrogen-bonded aggregate ( CHC⁺ ) or a covalent C−C bond ( CCH⁺ ). In this study, the intramolecular NHC–azolium salt interactions of aromatic imidazolin-2-ylidenes and saturated imidazolidin-2-ylidenes have been investigated in the gas phase by traveling wave ion mobility mass spectrometry (TW IMS) and DFT calculations. The TW IMS experiments provided evidence for the formation of these important intermediates in the gas phase, and they identified the predominant aggregation mode (hydrogen bond vs. covalent C−C) as a function of the nature of the interacting carbene–azolium pairs.